Customer reviews

Solid product. Only thing I would change is the top piece because it bumps the upper rad hose. Just reverse the design so the thinner part is by the rad hose and the cnc’d logo is toward the back. All in all solid product will shop from you again.

Fit great. Just wish there were holes in the bottom to weld like the sides

They look like a very stout piece. I am pretty mechanically inclined so I figured out how to install these guys. However, to the average guy who is going to need to cut and/or drill to install your product. Installation Instructions included in the box with them would be a pretty good idea. Might be good to send the longer screws needed to bolt them in or state the originals will still work. I believe the bolts through the frame will still work but the ones holding the bumper on that go through your tie in Mount and into the end of the frame. I believe need to be about .025" or however thick it is, longer to fully engage the nut plate.

Fit great. Just wish there were holes in the bottom to weld like the sides

My second bumper. Pretty happy with it. Feel like it should be a little thicker metal. But iv hit some rocks and trees so I know it can take a hit. Also wish the recovery point mounts were thicker. But I’m pretty happy with it.

Overall I was impressed with the build quality of the bracket and the included hardware made installation a breeze. However, this bracket did not fit in my 2001 XJ. I had to grind nearly half of the wider foot in order to make it fit. Considering this product is sold for the XJ and my year is listed, I was disappointed that I had to make modifications and re-paint.

I like the rear stiffener design but it needs a few things changed 1 needs holes for the sway bar bracket. Even if off road ppl don’t use the sway bar it’s a good way to bolt the stiffener on before welding. 2 needs more weld points. I drilled 5/8 holes in key locations for better support 3 the shape of the front piece is a little off. Had to trim slightly. 4 need to offer the inside portion of the rear rail as an option. I made 1/8” plates for my inside rails. Thanks Bill McGinnis

I like the rear stiffener design but it needs a few things changed 1 needs holes for the sway bar bracket. Even if off road ppl don’t use the sway bar it’s a good way to bolt the stiffener on before welding. 2 needs more weld points. I drilled 5/8 holes in key locations for better support 3 the shape of the front piece is a little off. Had to trim slightly. 4 need to offer the inside portion of the rear rail as an option. I made 1/8” plates for my inside rails. Thanks Bill McGinnis

The tray looks good and is definitely an upgrade. I must say that one of the threaded rods was badly cut and had to be recut to make a nut go over it. I was also supplied with 6 lock nuts which i think was not right (correct me if i’m wrong)

Bumper came a few days early (im in south tx), Welds look great, Gave it a 4 because I haven't installed it yet.

Bumper came a few days early (im in south tx), Welds look great, Gave it a 4 because I haven't installed it yet.

The bumper was solid. Would have been 5 stars- but they forgot to ship the brackets and hardware. They shipped them out fast after I contacted them, but the bolts they shipped didn't come close to fitting. I ended up going to the local hardware store and spent an additional $17 for the right bolts.

Rides like a stock xj. It’s fantastic I love flex I get out of it. I wish the threads for the flex joints went a little farther in the arms. That’s the only thing I didn’t like. Very fast and easy install. All parts were there. Great kit!

The welding work was good, but inconsistent, the flares were not the same shape from one side to another. Also, bending the flat flares to the curves of the quarter panels was a bit of a pain. Lastly, the rivnuts were useless. I ended up removing the inner panels in the back and using locknuts like the front. Once I got them installed however, they work great, covering my 31x10.5 tires, and allowing me the space to install 33s with 3 inches of lift. Overall, a good product that could really use some installation instructions and a bit better planning.

Fitment was decent, great looking when installed. Only reason I didnt give 5 stars is because it arrived alittle bent around the bottom edge under one of the access holes. It got beat up a bit in shipping and took a little bit of time to mak correct but

Quality parts, thanks.

Over all a great product. Only criticism I have is the mounting holes could be bigger to allow for variation.

It's been a few weeks since I purchased these brackets. Sadly I've yet to start building my bumper. As soon as its built pictures will be sent. I know for the price I could not have built something of the same quality. I know as soon as my bumper gets put on I'll never be able to RIP it off

It's been a few weeks since I purchased these brackets. Sadly I've yet to start building my bumper. As soon as its built pictures will be sent. I know for the price I could not have built something of the same quality. I know as soon as my bumper gets put on I'll never be able to RIP it off

as advertised